TorqBolt P(Ltd) supplies Ferralium 255 (UNS S32550, EN 1.4507) super duplex stainless steel into Australia for North-West Shelf LNG bolting, Pilbara iron-ore process plant hardware, Perth and Sydney desalination plant construction, defense industry forgings, and chemical processing plant fabrication. Manufactured in Mumbai and Rajkot, India, shipped to Fremantle, Sydney, Melbourne, Brisbane, Adelaide, and Darwin. Per-heat EN 10204 type 3.2 MTC with NACE MR0175 / ISO 15156-3 sour-service stamp and NORSOK M-650 QTR (MDS D55) for operators following the Norwegian super-duplex qualification track.
- Bar, round bar (6 to 600 mm OD), hex bar, square bar, flat bar, forged bar, cold-finished bar, hollow bar per ASTM A479 / A276 (and AS 1444 reference for Australian buyers cross-checking against Australian Standards)
- Plate and sheet, hot-rolled plate (3 to 100 mm), cold-rolled sheet (0.4 to 6 mm) per ASTM A240 and EN 10088-2
- Pipe and tube, seamless and welded pipe per ASTM A790 / A928, seamless and welded tube per ASTM A789 / A928
- Fittings and flanges, wrought fittings per ASTM A815, forged flanges per ASTM A182 (cross-checked against AS 4087 PN 16 / PN 21 / PN 35 / PN 50 ratings for Australian water-industry projects)
- Forgings, open-die and closed-die forgings per ASTM A182 / EN 10222-5
- Fasteners, hex bolts, stud bolts per ASTM A193 S6, heavy hex nuts per ASTM A194 S7, flat washers per ASTM F436, threaded rod per ASTM F1554, socket-head cap screws per DIN 912 / ISO 4762
- NORSOK M-650 capable manufacturer with QTR (MDS D55) on request, accepted by NW Shelf operators that mirror Norwegian super-duplex qualification tracks
- NACE MR0175 / ISO 15156-3 sour-service compliance certified per heat (hardness 32 HRC max, ferrite 35 to 55%) for offshore Bass Strait, Browse Basin, and Carnarvon Basin sour-gas projects
- ISO 9001:2015 quality management system
- Per-heat EN 10204 type 3.2 MTC with chemistry, mechanical properties, ferrite content per ASTM E562, hardness traverse, Charpy V-notch at the qualifying temperature, PREN calculation, and NACE conformance statement
- India-Australia trade benefits via the AI-ECTA (Australia-India Economic Cooperation and Trade Agreement, in force April 2022): preferential tariff on stainless steel imports into Australia versus suppliers from non-FTA origins
- Container shipping Mumbai (JNPT / Mundra) to Fremantle (21 days), Melbourne (24 days), Sydney (26 days), Brisbane (28 days), Adelaide (25 days), Darwin (18 days). Air freight 3 to 5 days for samples and urgent stud / nut replenishment
- AUD or USD pricing on request, INCO terms FOB Mumbai / CIF Australian port / DAP project site
- Origin declaration (Made in India) provided for Australian Made Australian Grown program disclosure on tender submissions
- Oil and gas, North-West Shelf and Browse Basin, INPEX Ichthys LNG, Chevron Wheatstone and Gorgon, Woodside Pluto and Scarborough, Shell Prelude FLNG project supply chains. Sour-service stud bolts, valve trim, wellhead components, X-mas tree internals.
- Iron-ore mining, Pilbara, BHP, Rio Tinto, Fortescue Metals Group, Hancock Prospecting process plant hardware. Pump shafts, slurry pipe couplings, screen assemblies in chloride-aggressive process water.
- Desalination, water utilities, Perth Seawater Desalination Plant (Kwinana, Binningup), Sydney Desalination Plant (Kurnell), Adelaide Desalination Plant (Lonsdale), Gold Coast Desalination Plant (Tugun). High-pressure pump bolting, RO membrane housing fasteners, intake screen assemblies.
- Defense, Adelaide and Henderson, ASC Pty Ltd Collins-class submarine sustainment, Naval Group Hunter-class frigate program, BAE Systems shipbuilding. Sour-resistant fasteners and forged components for marine systems.
- Pulp and paper, Tasmania and Victoria, kraft white-liquor service equipment, digester bolting, bleach-plant hardware where 316L SCC under chloride contamination is the failure mode.
- Chemical processing, Kwinana, Botany, Yarwun, alumina refining, phosphoric acid evaporator bolting, sulphuric-acid plant valve trim, chlor-alkali cell room hardware.
Australian Standards Cross-Reference
Australian buyers commonly specify against ASTM (oil and gas, mining, defense), AS / NZS (water utilities, civil and structural), or NORSOK (NW Shelf operators following Norwegian qualification). TorqBolt's Ferralium 255 is supplied per the controlling spec on the customer purchase order, with cross-reference noted on the MTC.
Standard consignment ships with: per-heat EN 10204 type 3.2 MTC (third-party witnessed), packing list with heat number traceability, certificate of origin (Made in India for AI-ECTA preference declaration), commercial invoice, bill of lading, fumigation and ISPM 15 wood packaging certification, Material Safety Data Sheet (where applicable), and NACE MR0175 conformance statement. NORSOK M-650 QTR (MDS D55) on request for NW Shelf operators. Customs clearance support for arrival at Fremantle, Sydney, Melbourne, Brisbane, Adelaide, and Darwin ports, including assistance with HS code declaration (typical Ferralium 255 HS 7222 for bar and 7307 for fittings).
TorqBolt P(Ltd), Mumbai office and Rajkot manufacturing facility, India. Trading hours 09:00 to 18:00 IST (12:30 to 22:30 AWST, 13:30 to 23:30 ACST, 14:30 to 00:30 AEST same day).
Phone: +91-22-66157017
Email: info@torqbolt.com
WhatsApp: +91-22-66157017
Need Ferralium 255 supply to Australia? Email info@torqbolt.com or WhatsApp +91-22-66157017 with form, dimensions, quantity, ASTM / AS / NORSOK spec, MTC level (3.1 / 3.2), destination port (Fremantle / Sydney / Melbourne / Brisbane / Adelaide / Darwin) and INCO terms (FOB Mumbai / CIF / DAP). NACE MR0175 sour-service stamp on every heat. NORSOK M-650 QTR (MDS D55) on request. Per-heat EN 10204 type 3.2 MTC included with every consignment.
- Passivation (ASTM A967)
- Pickling (ASTM A380)
- Electropolishing
- Mill / 2B / 2D / BA finish
- Bright bar / centreless ground
- Peeled & polished bar
- Shot-blast (EN 10088-2)
